Center Gauge for 370Z
 

 
With an OEM-style look, these displays will integrate perfectly and modernize your interior.
You can connect up to 2 sensors simultaneously and display their readings from the following 3 values:
 
 
 
Oil pressure
 
 
Water temperature
 
 
Boost pressure
 
 
Change the display at any time using the buttons assigned to each value on the electronic board.
Switch from Celsius to Fahrenheit or from Bar to PSI with a simple button press.
 
The display mode is changed using the buttons on the main board — simply set the switch corresponding to the value you want to display to ON.
Of course, the sensor for the selected value must be connected in order to display the measurement.
 

 
When a single value is displayed, it appears in numeric form along with a bar graph. However, when two values are displayed, they are shown only in numeric form, one above the other.
 
Included by default:
 
 
 
1 gauge
 
 
1 power cable with quick connectors (1 meter)
 
 
Available options:
 
 
 
Oil pressure: 1x 1/8 NPT pressure sensor + 1x cable (5 meters) + 1x adapter
 
 
Water temperature: 1x 1/8 NPT temperature sensor + 2x cables (5 meters)
 
 
Boost pressure sensor: 1x 1/8 NPT pressure sensor + 1x cable (5 meters)
 
 
Installation and wiring:
 
For installation of the system, you will find a photo tutorial above.
A PDF wiring diagram is available in the “TUTORIAL” section.
 
For installation of the water temperature sensor, you will first need to install a suitable adapter/support equipped with a 1/8 NPT sensor port.
 
Compatibility:
 
This gauge is compatible with all LHD and RHD 370Z models.
 
Measurement specifications:
 
 
 
Real-time display with a 70 ms refresh rate
 
 
Temperature sensor accuracy: ±5%
 
 
Measurement range: 40°C to 150°C or 100°F to 300°F
 
 
Overheating warning indicator at 150°C or 300°F
 
 
Boost pressure sensor accuracy: ±5%, max 30 PSI or 2 BAR
 
 
Worldwide shipping included.